Replacing Consumables
97
Maintenance
3
7 Close the cover.
8 Return the booklet staple cartridge to its
original position.
9 Slightly push the booklet staple cartridge
upwards, and make sure that it clicks into place.
Note • Return the booklet staple cartridge until ( )
of the booklet staple cartridge is fitted in
( ) of the booklet unit.
10 Return the booklet unit to its original position.
11 Close the finisher front door.
Note • If the front door is not closed completely, a message appears and the machine will remain paused.
Emptying the Hole Punch Waste Container (for Finisher-B1)
When the Finisher-B1 (optional) is installed and the hole punch waste container becomes
full, a message appears on the touch screen. When the message appears, empty the hole
punch waste container as instructed.
Make sure to discard all paper chads when emptying the hole punch waste container. Not
doing so will cause the container to fill up before the message telling you to empty the
container appears again, and this can cause machine malfunction.
Important • Empty the hole punch waste container when the machine is on. If you empty the container while the
machine is off, the machine does not recognize that the container has been emptied.
To Next Page
Loading...
Need help?
General
