5 Tools
276
Tools
5
Off
Does not respond.
On
Automatically notifies the sender that the e-mail has been processed.
Read Receipts
When an e-mail is sent from the machine, select whether or not to use the Read Receipts
feature.
Off
The Read Receipts feature is disabled.
On
Uses the Read Receipts feature.
Note • For the Internet fax read receipts setting, select either [Delivery Receipts] or [Read Receipts] in
[Delivery Confirmation Method] under [Tools] > [System Settings] > [Fax Service Settings] > [Internet
Fax Control].
Print Delivery Confirmation Mail
Select whether or not to automatically print transmission result e-mails (DSN response/MDN
response).
Off
Does not print transmission result e-mails.
On
Transmission result e-mails are automatically printed regardless of success or failure of the
transmission.
Print when delivery fails
Prints only when the transmission failed.
Split Send Method
Set the default value for the mail split method.
Split into Pages
Splits into pages.
Split by Data Size
Splits by the data size set in [Maximum Data Size per E-mail].
Maximum Data Size per E-mail
Set the upper limit of the data size for splitting mail.
Specify a value from 512 to 20480 KB in 1 KB increments. The default value is 10240 KB.
Maximum Total Data Size
Set the upper limit of the data size of mail.
Specify a value from 512 to 200000 KB in 1 KB increments. The default value is 200000 KB.
To Next Page
Loading...
Need help?
General
