Replacing Consumables
81
Maintenance
3
1 Make sure that the machine is not operating, and
open the front cover.
2 Put your hand under the dent of the toner
cartridge indicated in the message, and slightly
lift up the cartridge.
Note • "Y", "M", "C", or "K" indicates Yellow, Magenta,
Cyan, and Black, respectively.
3 Pull out the toner cartridge slowly, and slide it out.
Important • Slide out the toner cartridge gently. Otherwise, toner may spill from the cartridge.
• If you have a used toner cartridge which is no longer needed, contact our Customer Support Center
for its disposal.
4 Take the new toner cartridge of the same color
out of the box, and shake the cartridge up and
down and left and right for ten times.
Important • Do not touch the shutter part.
5 Hold the cartridge with the arrow facing up, and
push the cartridge in slowly until it stops.
Never throw a toner cartridge into an
open flame. Remaining toner in the
cartridge may catch fire and cause burn
injuries or explosion.
If you have a used toner cartridge no
longer needed, contact your local Fuji
Xerox representative for its disposal.
To Next Page
Loading...
Need help?
General
