Fuji Xerox DocuPrint M465 AP User Manual

4 Fax
212
Fax
4
F Code Method
You can perform Relay Broadcast by registering the relay station’s F code and password (if
necessary) to the machine.
Note •When performing Relay Broadcast with the F Code method, you can use a password if you set a
receive password for the relay station.
• When performing Relay Broadcast between Fuji Xerox manufactured machines that can be used as
both an initiating station and a relay station, we recommend that you use the fax signal method.
• Confirm the F code (sub-address) and password of the target relay station.
1 Select the [Fax/Internet Fax Options] tab to
display the [Fax/Internet Fax Options] screen.
2 Select [F Code].
3 Select [On].
4 Select the [F Code] box, and enter the F code with the numeric keypad.
Note •You can enter up to 20 digits for the F Code.

Relay Broadcast
The number of digits of the relay station ID:
1: When the relay station IDs and address numbers are two digits
2: When the relay station IDs and address numbers are three digits

Print Directive
Printing/not printing at the relay station
1: Printing at the relay station
0: Not printing at the relay station
Relay Broadcast Print
Directive
Relay
Station ID
Address
Number
Address
Number
Address
Number
....
Up to 20 digits

Fuji Xerox DocuPrint M465 AP Specifications

General

Brand	Fuji Xerox
Model	DocuPrint M465 AP
Category	All in One Printer
Language	English