FujiFilm X10 - I Playback Volume; J Lcd Brightness; M Auto Power off; Quick Start Mode

101
Menus
The Setup Menu
I
I
PLAYBACK VOLUME [7]
PLAYBACK VOLUME [7]
Adjust the volume for movie and voice memo
playback.
J
J
LCD BRIGHTNESS [0]
LCD BRIGHTNESS [0]
Control the brightness of the display.
M
M
AUTO POWER OFF [2 MIN]
AUTO POWER OFF [2 MIN]
Choose the length of time before the camera
turns off automatically when no operations are
performed. Shorter times increase battery life; if
OFF is selected, the camera must be turned off
manually. Note that in some situations the cam-
era turns off automatically even when OFF is se-
lected.
1
1
QUICK START MODE [OFF]
QUICK START MODE [OFF]
Allow the camera to restart in a fast manner after
turned off (ON/OFF).
3
This option will increase drain on the battery.
F
F
Fn BUTTON [
Fn BUTTON [
N
N
ISO]
ISO]
Choose the role played by the Fn button (P 51).
L
L
DUAL IS MODE [
DUAL IS MODE [
L
L
]
]
Choose from the following image stabilization
options:
Option
Option
Description
Description
L
CONTINUOUS +
MOTION
Image stabilization on. If + MOTION
is selected, the camera will adjust
shutter speed to reduce motion blur
when a moving objects are detected.
lCONTINUOUS
MSHOOTING
+ MOTION
As above, except that image stabili-
zation is performed only when the
shutter button is pressed halfway or
the shutter is released.
m
SHOOTING ONLY
OFF
Image stabilization off. Choose this
option when using a tripod.
3
+ MOTION has no effect when sensitivity is set to a
fixed value, and may also be unavailable at some other
combinations of settings. The effect may vary with
lighting conditions and the speed at which the object
is moving.