FujiFilm X10 User Manual

First Steps
8
Attaching the Strap
Attach the strap clips to the camera and then attach the strap.
First Steps
1
Open a strap clip.
Use the clip attaching tool to open a strap
clip as shown.
3
Keep the tool in a safe place. You will need it to
open the strap clips when removing the strap.
2
Place the strap clip on an eyelet.
Hook the strap eyelet in the clip opening.
Remove the tool, using the other hand to
keep the clip in place.
3
Pass the clip through the eyelet.
Rotate the clip fully
through the eyelet until it
clicks closed.
4
Attach a protective cover.
Place a protective cover over the eyelet as
shown, with the black side of the cover to-
ward the camera. Repeat Steps 1–4 for the
second eyelet.

FujiFilm X10 Specifications

General

Sensor Type	2/3-inch EXR CMOS
Lens	Fujinon 4x optical zoom lens
Focal Length	7.1-28.4mm (35mm equivalent: 28-112mm)
Video Recording	Full HD 1080p at 30fps
Storage Media	SD / SDHC / SDXC memory card
Weight	Approx. 350g (including battery and memory card)
Dimensions	117.0 (W) x 69.6 (H) x 56.8 (D) mm
Effective Pixels	12 megapixels
Aperture	f/2.0 - f/2.8
Image Stabilization	Optical
LCD Monitor	2.8-inch, approx. 460, 000 dots, LCD monitor
Viewfinder	Optical
Battery	NP-50 Li-ion battery
Shutter Speed	30 - 1/4000 sec
Continuous Shooting	Up to 7 fps
ISO Sensitivity	ISO 100 - 3200 (ISO 6400 at M size or smaller, ISO 12800 at S size)