First Steps
17
Basic Setup
A language-selection dialog is displayed the first time the camera is turned on. Set up the camera as
described below (for information on resetting the clock or changing languages, see page 98).
START MENU
SET NO
ENGLISH
PORTUGUÊS
ESPAÑOL
FRANCAIS
DEUTSCH
1
Highlight a language and press MENU/OK.
1
Press DISP/BACK to skip the current step. Any steps you skip will be displayed
the next time the camera is turned on.
SET NO
DATE / TIME NOT SET
2013
2012
2010
2009
YY. MM. DD
1. 1 12
:
00
AM
2011
2
The date and time will be displayed. Press the selector left or right to
highlight the year, month, day, hour, or minute and press up or down
to change. To change the order in which the year, month, and day
are displayed, highlight the date format and press the selector up or
down. Press MENU/OK when settings are complete.
3
Power management options will be displayed. Press the selector up
or down to highlight one of the following options and then press
MENU/OK:
• n POWER SAVE: Save battery power.
• o CLEAR DISPLAY: Choose for a brighter, higher quality display.
2 The Camera Clock
If the battery is removed for an extended period, the camera clock will be reset and the language-selection dialog
will be displayed when the camera is turned on.
To Next Page
Loading...
