FujiFilm X10 User Manual

24
Shooting Mode
P
P
: PROGRAM AE
: PROGRAM AE
In this mode, the camera sets exposure
automatically. If desired, you can choose
different combinations of shutter speed
and aperture that will produce the same
exposure (program shift).
3
If the subject is outside the metering range of the cam-
era, the shutter speed and aperture displays will show
“---”. Press the shutter button halfway to measure ex-
posure again.
Program Shift
Rotate the main/sub-command dial to choose the
desired combination of shutter speed and aperture.
The default values can be restored by raising the
flash or turning the camera off. To use program shift,
turn the flash off and select OFF for g EXTERNAL
FLASH. Furthermore, an option other than AUTO
must be selected for U DYNAMIC RANGE and
N ISO.
2000
F5.6
Shutter speed
Aperture

FujiFilm X10 Specifications

General

Sensor Type	2/3-inch EXR CMOS
Lens	Fujinon 4x optical zoom lens
Focal Length	7.1-28.4mm (35mm equivalent: 28-112mm)
Video Recording	Full HD 1080p at 30fps
Storage Media	SD / SDHC / SDXC memory card
Weight	Approx. 350g (including battery and memory card)
Dimensions	117.0 (W) x 69.6 (H) x 56.8 (D) mm
Effective Pixels	12 megapixels
Aperture	f/2.0 - f/2.8
Image Stabilization	Optical
LCD Monitor	2.8-inch, approx. 460, 000 dots, LCD monitor
Viewfinder	Optical
Battery	NP-50 Li-ion battery
Shutter Speed	30 - 1/4000 sec
Continuous Shooting	Up to 7 fps
ISO Sensitivity	ISO 100 - 3200 (ISO 6400 at M size or smaller, ISO 12800 at S size)