FujiFilm X10 User Manual

37
More on Photography
N Using the Flash (Super-Intelligent Flash)
When the flash is used, the camera’s Super-Intelligent Flash system instantly analyzes the scene based
on such factors as the brightness of the subject, its position in the frame, and its distance from the
camera. Flash output and sensitivity are adjusted to ensure that the main subject is correctly exposed
while preserving the effects of ambient background lighting, even in dimly-lit indoor scenes. Use the
flash when lighting is poor, for example when shooting at night or indoors under low light.
1
Raise the flash.
Slide the flash pop-up switch to raise the flash.
2
Choose a flash mode.
Press the selector right (N). The flash mode changes each time the selector is pressed.
Mode
Mode
Description
Description
A/K
(AUTO FLASH)
The flash fires when required. Recommended in most situations.
N/L
(FORCED FLASH)
The flash fires whenever a picture is taken. Use for backlit subjects or for natural
coloration when shooting in bright light.
O/M
(SLOW SYNCHRO)
Capture both the main subject and the background under low light (note that
brightly lit scenes may be overexposed).

FujiFilm X10 Specifications

General

Sensor Type	2/3-inch EXR CMOS
Lens	Fujinon 4x optical zoom lens
Focal Length	7.1-28.4mm (35mm equivalent: 28-112mm)
Video Recording	Full HD 1080p at 30fps
Storage Media	SD / SDHC / SDXC memory card
Weight	Approx. 350g (including battery and memory card)
Dimensions	117.0 (W) x 69.6 (H) x 56.8 (D) mm
Effective Pixels	12 megapixels
Aperture	f/2.0 - f/2.8
Image Stabilization	Optical
LCD Monitor	2.8-inch, approx. 460, 000 dots, LCD monitor
Viewfinder	Optical
Battery	NP-50 Li-ion battery
Shutter Speed	30 - 1/4000 sec
Continuous Shooting	Up to 7 fps
ISO Sensitivity	ISO 100 - 3200 (ISO 6400 at M size or smaller, ISO 12800 at S size)