FujiFilm X10 User Manual

46
Focus Mode
Use the focus mode selector to choose how the camera focuses.
The following options are available:
Mode
Mode
Description
Description
AF-S
(SINGLE AF)
Focus locks while the shutter button is pressed halfway. Choose for stationary subjects.
AF-C
(CONTINUOUS AF)
The camera continually adjusts focus to reflect changes in the distance to the subject even
when the shutter button is not pressed halfway (note that this increases the drain on the
battery). Choose for moving subjects.
MF
(MF)
Focus manually using the sub-command dial. Rotate the sub-command dial left to reduce
the focus distance, right to increase. The manual focus indicator indicates how closely the
focus distance matches the distance to the subject in the focus brackets (the red bar indicates
the focus distance, the white bar the depth of field, or in other words the distance in front of
and behind the focus point that appears to be in focus). Choose for manual control of focus
or in situations in which the camera is unable to focus using autofocus (P 34). Intelligent
Face Detection turns off automatically.
Reduce focus
distance
Increase fo-
cus distance
Manual focus mode icon
Manual focus
indicator
2000 F6.4
M
Focus distance
(red bar)
Depth of field
(white bar)

FujiFilm X10 Specifications

General

Sensor Type	2/3-inch EXR CMOS
Lens	Fujinon 4x optical zoom lens
Focal Length	7.1-28.4mm (35mm equivalent: 28-112mm)
Video Recording	Full HD 1080p at 30fps
Storage Media	SD / SDHC / SDXC memory card
Weight	Approx. 350g (including battery and memory card)
Dimensions	117.0 (W) x 69.6 (H) x 56.8 (D) mm
Effective Pixels	12 megapixels
Aperture	f/2.0 - f/2.8
Image Stabilization	Optical
LCD Monitor	2.8-inch, approx. 460, 000 dots, LCD monitor
Viewfinder	Optical
Battery	NP-50 Li-ion battery
Shutter Speed	30 - 1/4000 sec
Continuous Shooting	Up to 7 fps
ISO Sensitivity	ISO 100 - 3200 (ISO 6400 at M size or smaller, ISO 12800 at S size)