FujiFilm X10 User Manual

53
More on Photography
n Face Recognition
The camera can store information on the face
and personal details (name, relationship, and
birth date) of portrait subjects and assign these
subjects priority for Intelligent Face Detection or
display their names and other information during
playback.
Adding New Faces
Adding New Faces
Follow the steps below to add faces to the face
recognition database.
1
Select REGISTER.
Select REGISTER for n FACE RECOGNI-
TION in the shooting menu.
1
To disable face recognition, select OFF.
2
Take a photograph.
After checking that the
subject is facing the cam-
era, frame the subject us-
ing the guides and take
the photograph.
1
If an error is displayed, take the photograph again.
3
Enter face recognition data.
Press MENU/OK to display face recognition
data and enter the following information:
• NAME: Enter a name of up to 14 characters
and press MENU/OK.
• BIRTHDAY: Enter the subject’s date of birth
and press MENU/OK.
• CATEGORY: Choose the option that describes
your relationship to the subject and press
MENU/OK.
1
If you attempt to zoom in on the face of a person in-
dicated by a green border in the face recognition da-
tabase on their birthday, the camera will display their
name and the message “Happy Birthday!”.
c
Face recognition may not be available depending on
the shooting mode.
CANCEL
REGISTER FACE
CAPTURE THE FACE
ALONG WITH THE GUIDLINE

FujiFilm X10 Specifications

General

Sensor Type	2/3-inch EXR CMOS
Lens	Fujinon 4x optical zoom lens
Focal Length	7.1-28.4mm (35mm equivalent: 28-112mm)
Video Recording	Full HD 1080p at 30fps
Storage Media	SD / SDHC / SDXC memory card
Weight	Approx. 350g (including battery and memory card)
Dimensions	117.0 (W) x 69.6 (H) x 56.8 (D) mm
Effective Pixels	12 megapixels
Aperture	f/2.0 - f/2.8
Image Stabilization	Optical
LCD Monitor	2.8-inch, approx. 460, 000 dots, LCD monitor
Viewfinder	Optical
Battery	NP-50 Li-ion battery
Shutter Speed	30 - 1/4000 sec
Continuous Shooting	Up to 7 fps
ISO Sensitivity	ISO 100 - 3200 (ISO 6400 at M size or smaller, ISO 12800 at S size)