FujiFilm X10 User Manual

109
Technical Notes
Optional Accessories
Attaching the Lens Hoods
Attaching the Lens Hoods
1
Connect the lens
hood and the adapt-
er ring as shown.
Adapter ring
Lens hood
2
Attach the lens
hood to the camera
with the connected
adapter ring.
Rotate the lens hood
as shown.
a
Keep the lens cap in a safe place when not in use.
Attaching the Filters (available from
Attaching the Filters (available from
third-party suppliers)
third-party suppliers)
1
Remove the adapter
ring from the lens
hood as shown.
2
Attach the adapter
ring to the camera.
Rotate the adapter
ring as shown.
3
Attach the filter to the adapter ring.
For details, please refer to the manual sup-
plied with the filter.
a
• Only φ52 mm filters can be attached.
• Keep the lens cap in a safe place when not in use.
• Filters cannot be attached directly to the camera.
Make sure to use the adapter ring.
• The lens hood can be attached after the filter is at-
tached.

FujiFilm X10 Specifications

General

Sensor Type	2/3-inch EXR CMOS
Lens	Fujinon 4x optical zoom lens
Focal Length	7.1-28.4mm (35mm equivalent: 28-112mm)
Video Recording	Full HD 1080p at 30fps
Storage Media	SD / SDHC / SDXC memory card
Weight	Approx. 350g (including battery and memory card)
Dimensions	117.0 (W) x 69.6 (H) x 56.8 (D) mm
Effective Pixels	12 megapixels
Aperture	f/2.0 - f/2.8
Image Stabilization	Optical
LCD Monitor	2.8-inch, approx. 460, 000 dots, LCD monitor
Viewfinder	Optical
Battery	NP-50 Li-ion battery
Shutter Speed	30 - 1/4000 sec
Continuous Shooting	Up to 7 fps
ISO Sensitivity	ISO 100 - 3200 (ISO 6400 at M size or smaller, ISO 12800 at S size)