Operation
Message
when software that supports this function is used, the appearance of this symbol on
the display indicates that an incoming message (mail, fax) is waiting.
Appears on the LCD when an incoming message (mail, fax) is waiting. This symbol
only appears if you use software that supports this function.
Drive indicator, e.g. DVD
The indicator lights up when the CD-ROM or DVD drive is accessed. You may only remove the
CD/DVD when the indicator is dark.
Keyboard
1
34
5
2
1 = Function keys
2 = Power button (optional)
3 = Alphanumeric keypad
4 = Cursor keys
5 = Numeric keypad (calculator keypad)
The illustrated keyboard is an example and may differ from the model you use.
i
Important keys and key combinations
The description of the following keys and key combinations applies to Microsoft operating systems.
Details of other keys and key combinations can be found in the documentation of the relevant
application programme.
ON/OFF switch (optional)
Depending on the setting in the
BIOS Setup, the system can be switched on, off, or on
and off with this button. Some operating systems allow you to configure additional
functions of the ON/OFF switch in the Control Panel (e.g. standby mode, rest mode).
With some keyboards the ON/OFF switch can only be used with an ACPI (Advanced
Configuration and Power Management Interface). Otherwise the key is inoperative.
The mainboard must support this function.
Fujitsu Technology Solutions 17
To Next Page
Loading...
Need help?
General
