Fujitsu fi-6110 User Manual

Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
112
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
"E" (or other numbers/letters) is already
displayed on the Function Number Display after
power-on.
Does the problem persist after turning the power off then
back on?
No
The scanner is operating correctly.
Ye s
Is "c" flashing on the Function Number Display, and is the
Check LED flashing as well?
Ye s
Close the ADF properly.
For details, refer to "How to Close the ADF" (page 19).
If the display does not return to ready ("1") after closing the ADF, check the items
in "8.4 Before You Contact the Scanner Service Provider" (page 121) first, then
contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service
provider.
No
Is "h" displayed on the Function Number Display during
scanning?
Ye s
There is no problem. The scanner is operating in protection mode. It will return to
normal when you continue scanning. Note that the interval to feed the documents
becomes longer in protection mode.
No
If the problem persists, check the items in "8.4 Before You Contact the Scanner
Service Provider" (page 121) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.

Fujitsu fi-6110 Specifications

General

Film scanning	No
Color scanning	Yes
Grayscale levels	1024
Input color depth	24 bit
Maximum scan size	216 x 355.6 mm
Optical scanning resolution	600 x 600 DPI
Flatbed scan speed (b/w, A4)	3 sec/page
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	500 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	52 - 127 g/m²
Dimensions (WxDxH)	292 x 143 x 130 mm
Power requirements	100 - 240 V, 50/60 Hz
Image formats supported	JPG, TIF
Recommended media weight	80 g/m²
Compatible operating systems	Microsoft Windows 7 (32bit/64bit)/Vista (32bit/64bit), Windows Server 2003/2008/2008 R2 (32bit/64bit), Windows XP (32bit/64bit).
Power supply type	AC
Power consumption (standby)	5.36 W
Power consumption (typical)	28 W
Operating temperature (T-T)	42 - 95 °F
Operating relative humidity (H-H)	20 - 80 %
Bundled software	TWAIN, ISIS, ScandAll PRO, Adobe Acrobat, QuickScan Pro.

Weight and Dimensions

Depth	143 mm
Width	292 mm
Height	130 mm
Weight	3000 g