Fujitsu fi-6110 User Manual

Chapter 6 Daily Care
Appendix
Glossary
Introduction
Index
Contents
TOP
87
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Daily Care
Operational
Settings
The outside of the scanner, including the ADF paper chute
and the stacker, should be cleaned with either a piece of dry
cloth, a cloth/Cleaning Paper moistened with Cleaner F1/mild
detergent, or a sheet of Cleaning Wipe.
6.2 Cleaning the Outside
！！！
z Never use paint thinner or any other organic solvents.
z Do not let any moisture or water inside the scanner during
cleaning.
z It may take a long time to dry if an excessive amount of
Cleaner F1 is used. Moisten the cloth with moderate
quantity. Wipe off the cleaner completely to leave no
residue on the cleaned parts.
Thinner
Cleaner F1
or mild detergent
Cloth

Fujitsu fi-6110 Specifications

General

Film scanning	No
Color scanning	Yes
Grayscale levels	1024
Input color depth	24 bit
Maximum scan size	216 x 355.6 mm
Optical scanning resolution	600 x 600 DPI
Flatbed scan speed (b/w, A4)	3 sec/page
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	500 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	52 - 127 g/m²
Dimensions (WxDxH)	292 x 143 x 130 mm
Power requirements	100 - 240 V, 50/60 Hz
Image formats supported	JPG, TIF
Recommended media weight	80 g/m²
Compatible operating systems	Microsoft Windows 7 (32bit/64bit)/Vista (32bit/64bit), Windows Server 2003/2008/2008 R2 (32bit/64bit), Windows XP (32bit/64bit).
Power supply type	AC
Power consumption (standby)	5.36 W
Power consumption (typical)	28 W
Operating temperature (T-T)	42 - 95 °F
Operating relative humidity (H-H)	20 - 80 %
Bundled software	TWAIN, ISIS, ScandAll PRO, Adobe Acrobat, QuickScan Pro.

Weight and Dimensions

Depth	143 mm
Width	292 mm
Height	130 mm
Weight	3000 g