Small parts of the LC kit
Figure 166: Small parts of the LC kit
1 2x tube holder
2 2x screws for cable clip (white)
3
6x screws
4 marking rings (red and blue)
5 2x cable clips (orange)
6 2x cable clip (white)
12.3 Replacing the CPU or LC kit
Field Replaceable Unit
(FRU)
Hardware: 15 minutes
Software: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
CAUTION
CPUs are extremely sensitive to electrostatic discharge and therefore
must always be handled with care.
â–¶
After a CPU has been removed from its protective sleeve or from its
socket, place it upside down on a nonconducting, antistatic surface.
â–¶
Never push a CPU over a surface.
Liquid cooling (LC)
RX4770 M6 Upgrade and Maintenance Manual 281