9.3.2 Removing slot brackets
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
Removing a slot bracket
â–¶
Remove the two screws.
â–¶
Remove the controller from the mounting tabs on the slot bracket.
9.4
Handling SFP+ transceiver modules
9.4.1
Installing SFP+ transceiver modules
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less
The SFP+ transceiver modules are hot-pluggable. The activation replacement
depends on the system configuration. Check it with the customer who is
managing the system or the system engineer.
Expansion cards and backup units
RX4770 M6 Upgrade and Maintenance Manual 177