16.2.3 Server rear
16.2.3.1 Connectors on the server rear
Figure 251: Connectors on the server rear
1 Management LAN connector
2
OCP module
3
USB 3.0 connector
4 Serial COM connector
5 Rear VGA connector
The management LAN connector (1) is used for iRMC S5 server management.
The OCP module (2) is an option (there are different variants).
Depending on the BIOS settings, the shared LAN connector may also
be used as a management LAN connector. For more information, see
the corresponding BIOS Setup Utility reference manual.
Some of the devices connected require special software (e.g. drivers)
(see documentation for the connected device).
Liquid cooling configuration
A LC configuration is provided on special release request only.
The quick connectors to connect the LC to the server system are on the rear of
the server.
Appendix A
RX4770 M6 Upgrade and Maintenance Manual 409
To Next Page
Loading...
Need help?
General