Fujitsu PRIMERGY RX4770 M6 User Manual

Figure 219: Installing the M.2 SSD (B)
▶
Push down the M.2 SSD until the M.2 SDD latch locks in (see circle).
Concluding steps
▶
"Installing the OCP air duct" on page
73.
▶
"Installing the top system board carrier" on page
76.
▶
"Installing the air duct 1 (top system board)" on page 71.
▶
"Installing the fan cage" on page 66.
▶
Install the riser modules, see "Installing a riser module" on page 63.
▶
"Reassembling" on page 53.
▶
"Connecting the power cord" on page 59.
▶
"Switching on the server" on page 60.
▶
If applicable, "Installing the front cover with lock" on page 61.
Software configuration
In order to install the ESXi to the M.2 SSD, the VMware ESXi installer CD is
required. To obtain the ESXi installer CD by purchasing the OEM Media Kit, or
downloading the ESXi Custom Image ISO file from the VMware website and
burn the image to the CD.
https://www.vmware.com/go/download-vsphere
System board and components
RX4770 M6 Upgrade and Maintenance Manual 355

Fujitsu PRIMERGY RX4770 M6 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX4770 M6
Category	Server
Language	English