Fujitsu ScanSnap S500 User Manual

7.3 Replacing the Pick Roller
ScanSnap S500 Operator's Guide 163
Replacing Consumables and Carrier Sheet
7
7.3 Replacing the Pick Roller
Replace the Pick roller following the procedure below.
1. Remove the documents on the paper chute.
2. Open the ADF cover while pulling the cover open lever.
3. Adjust the Side guide to the "A5" size.
ADF cover
Cover open lever
Paper chute
A5
A5

Fujitsu ScanSnap S500 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum system requirements	Windows 2000/ XP/ Vista
Scan media weight	52 - 127 g/m²
Power requirements	AC 100V - 240V, 50 / 60 Hz
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	2700 g