Fujitsu ScanSnap S500 User Manual

3.1 Flow of Operations
ScanSnap S500 Operator's Guide 35
Basic Scanner Operations
3
■ End of Operation
Closing "ScanSnap Manager"
Operation
Right-click "ScanSnap Manager" icon on the taskbar, and select "Exit" from the menu.
Disconnecting the scanner
Operation
1. Close the paper chute to turn off the scanner.
⇒ The "ScanSnap Manager" icon in the taskbar changes from the "Active" icon to the
"Inactive"
icon.
2. Disconnect the USB cable from your personal computer.
3. Disconnect the AC cable from the power outlet.
HINT
"ScanSnap Manager" should be started for operating ScanSnap. To start
"ScanSnap Manager", select [All Programs] -> [ScanSnap Manager] -> [Scan-
Snap Manager].
(*Generally, there is no need to quit "ScanSnap Manager.")
HINT
The power of the scanner is controlled by turning on/off of the personal com-
puter or opening/closing of the paper chute. In general, you do not have to turn
on/off the scanner when it is connected to your personal computer.
S
S
S
S

Fujitsu ScanSnap S500 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum system requirements	Windows 2000/ XP/ Vista
Scan media weight	52 - 127 g/m²
Power requirements	AC 100V - 240V, 50 / 60 Hz
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	2700 g