BIOS Setup Utility 8
Exiting BIOS Setup 2
Once you have finished making changes in BIOS Setup, you must exit BIOS Setup and allow the system to boot to
apply your configuration changes. You can exit BIOS Setup by selecting options in the Exit menu. The Exit menu
includes options that allow you to load default BIOS settings, load previous settings, discard your changes, save your
changes, and exit BIOS Setup. For details on Exit menu options, see “Exit Menu Options” on page 27.
Change the setting of a
selected BIOS option
To cycle through the list of possible settings, do one of the following:
• Tap directly on the setting field
• Tap on the highlighted commands to the right or left of Change Values in the
command bar
• Use the -, +, and space keys on an external keyboard
• Press the Display Orientation button (third button from the right)
Access a pop-up menu
with a list all possible
settings for a given BIOS
option
Tap on the [option], then press the [Ent] application button. Tap on the setting of
your choice to select it. You can also hold the pen barrel button while tapping to bring
up the pop-up menu.
Select and enter a submenu To select and enter a submenu, do one of the following:
• Tap on the submenu name, then tap again to activate it.
• Select the submenu using the up and down arrow keys on an external keyboard
and press Enter, or press the [Ent] application button.
View Item-Specific Help for
a BIOS option
Select the option. Item-specific help is displayed in the Item Specific Help panel on the
right-hand side of the screen.
View General Help for
BIOS Setup
Tap on Help in the command bar or press F1 on your external keyboard. The BIOS Setup
help screen is displayed giving general instructions for using BIOS Setup
Exit BIOS Setup To exit the BIOS Setup Utility, do one of the following:
• Choose the appropriate option from the Exit menu
• Tap Save and Exit in the command bar
• Press F10 on an external keyboard.
Load factory default
settings for all BIOS options
To load the factory BIOS default settings, do one of the following:
• Press F9 on an external keyboard
• Select Setup Defaults from the command bar
• Select Load Setup Defaults from the Exit menu
If you want to... Do one of these...
To Next Page
Loading...
Need help?
General