1. OPERATIONAL OVERVIEW
1-116
1.60 Doppler Feature (X-band Solid State Radars
only)
When activated, the doppler feature can help with clutter reduction, making targets
easier to find. This feature is only available with FAR-2228-NXT, FAR-2228-NXT-BB
or FAR-2328-NXT.
To activate and use the feature, follow the procedure below.
1. Open the menu.
2. Select [1 ECHO].
3. Select [0 NEXT] to show the second page of the menu.
4. Select [9 DOPPLER].
5. Select the required setting, referring to the descriptions below.
• [0]: Disables the doppler feature.
• [1]: Reduces noise, making weak targets easier to find.
• [2]: Reduces clutter from rain, etc., making it easier to find targets previously
hidden by clutter.
6. Close the menu.
To Next Page
Loading...
General
