5. VIDEO PLOTTER OPERATION
5-24
5.10.5 How to use the waypoint arrival distance function
The waypoint arrival distance function lets you know when you are within a preset dis-
tance from the next waypoint. When the waypoint arrival area is set, the next waypoint
is shown circumscribed with an dashed orange-colored circle, whose radius is equiv-
alent to waypoint arrival distance setting. When your vessel comes within the destina-
tion arrival radius, the system places the arrival radius marker on the next destination.
For type radars only, you can also set a waypoint arrival alert.
Note: To use this alert, set [2 NAV LINE DATA SOURCE] in the [NAV LINE•WPT]
menu to [EXT DATA] or [INTERNAL DATA] before-hand. See section 5.9.1 for details.
To set and use the waypoint arrival area function, follow the procedure below.
1. Open the menu.
2. Select [8 NAVLINE•WPT].
3. Select [0 NEXT]. The second page of the [NAVLINE•WPT] menu appears.
4. Select [2 WPT ARRIVAL DIST].
5. For B/W-type radars only, select [ON] to enable the arrival alert, or [OFF] to dis-
able the arrival alert.
6. For all radar types, set the width (radius) of the arrival area.
7. Close the menu.
Own ship
Waypoint
arrival
distance
Waypoint
Alert area
To Next Page
Loading...
General
