5. VIDEO PLOTTER OPERATION
5-30
5.11.6 How to check your charts/symbol versions
You can check the version of your charts and symbols from the [CHART ADMINIS-
TRATION] menu.
1. Open the menu.
2. Select [9 INITIAL SETTINGS].
3. Select [8 UPDATE CHART]. The confirmation message "OTHER FUNCTIONS
WILL STOP DURING THE CHART UPDATE. ARE YOU SURE?" appears.
4. Select [RUN] to access the [CHART ADMINISTRATION] menu.
5. Select [6 BASECHARTS • SYMBOLS VERSION]. The version information for
your charts and symbols appears.
6. Right-click to go back to the [CHART ADMINISTRATION] menu.
7. Select [7 CLOSE]. The confirmation message [CLOSE CHART ADMINISTRA-
TION AND RESTART THE SYSTEM?] appears.
8. Select [RUN]. The system restarts.
Instructions for these menu
items are contained in the
Installation Manual IME-36520
To Next Page
Loading...
General
