3. TARGET TRACKING (TT)
3-11
3.10.2 How to show/remove target data in the data display area
Place the cursor on a desired tracked target and left-click, or press the ACQ key. The
target’s symbol is surround with a broken square and the selected TT target’s data is
shown in the data display area.
Note: This feature requires [2 TGT DATA/ACQ SETTING] on the second page of the
[CURSOR] menu to be set as [ANY] or [TT ONLY].
The number of TT data that can be displayed at one time in the information box de-
pends on your settings for [7 INFORMATION BOX] (see section 1.47).
To remove the target data, place the cursor on a desired tracked target, or the dis-
played data in the data area, then press the TARGET CANCEL key, left-click. The se-
lect target’s data is removed from the data display area.
Indication Description
Target No. Number assigned by the system to this target. Target numbers which
have become vacant are not re-used until the system is restarted, or the
system tracks more than 100 targets.
Name Name assigned to this target (B/W-types only).
Note: If the assigned name (see section 3.11) is more than six characters
in length, only the fist six characters of the name appear here.
BRG Bearing from own ship to target in relative (R) or True (T) reference.
RNG Range from own ship to target.
T COG Relative (R) or True (T) Course Over Ground of target.
Displayed as "T CTW" where speed input is set to [LOG(WT)].
Displayed as "R CRS" where speed data is not available.
T SOG Relative (R) or True (T) Speed Over Ground of target.
Displayed as T STW where speed input is set to [LOG(WT)].
Displayed as R SPD where speed data is not available.
CPA Closest Point of Approach of target to own ship.
TCPA Time to CPA of target to own ship.
BCR Bow crossing range of target.
BCT Bow crossing time of target.
To Next Page
Need help?
General
