111
<Model Menu (Airplane/Glider Functions)>
AIR BRAKE
AIL 3
(Chip Aileron)
AIL 4
(Chip Aileron)
AIL1
(Main Aileron)
AIL 2
(Main Aileron)
FLP 2
(Camber Flap)
FLP 1
(Camber Flap)
V-TAIL
at AILEVATOR
FLP 3
(Brake Flap)
FLP 4
(Brake Flap)
RUDDER 2
Winglet
RUDDER 1
(ELEVATOR 2)
RUDDER
RUDDER
ELEVATOR
(RUDDER 2)
Winglet
at Flying wing
at Flying wing
at Flying wing
( )
( )
ELEVATOR
(AILERON 5)
ELEVATOR 2
(AILERON 6)
elevators. [Airplane/glider, 2 ailerons or more]
This mixing is used when you want to the mix
increased with raised elevators. [Airplane/glider,
2 ailerons or more]
This mixing is used to correct for attitude changes
is necessary. [Glider, 2 ailerons or more]
2 ailerons or more]
(Airplane, general)
This is dedicated mixing when a gyro is used.
[Airplane/glider, general]
This function adjusts the elevators and rudder of
This function adjusts the elevators and ailerons of
This function adjusts the left and right rudders
of winglet models. [Airplane/glider, winglet
The operation speed when the motor of F5B and
glider, general]
edge, etc. of stunt planes. [Airplane, general]
This function selects the snap roll switch and adjusts
the steering angle of each rudder. Servo speed can
This function adjusts the throttles independently
when using a multi engine model. (Maximum 4
engines) [Airplane, general]
To Next Page
Loading...
Need help?
General
