FUTABA T18MZ User Manual

97
<Linkage Menu>



Sensor

Procedure for changing the sensor of each slot No.
1.Select[Sensor]fromtheLinkageMenu.
2.SelectthesensoroftheslotNo.tobechanged.
3.Selectthetypeofdisplayedsensor.
4.Whenthe[Yes]keyispressed,thetypeofsensoris
changed.
*In the case of a sensor which uses more than one slot, you may
be unable to reassign.
The telemetry sensor slot No. and which sensor
is used in each slot can be changed in this screen.
Since the sensor in each slot is determined at
initialization and the same slot No. is memorized
even for sensors sold separately, sensors can be

customizing the sensors yourself, perform the
settings in this screen.
[What is a slot?]
Servos are classified by CH, but sensors are
classified in units called “slot”. There are slots
from No. 1 to No. 31.
Altitude sensors and other data sensor units
may use multiple slots.

the required number of slots is automatically
assigned by setting up a start slot.
When 2 or more of the same kind of sensor
are used, the sensors themselves must allocate
unused slots and memorize that slot.
*Three slots of altitude sensor are used.

FUTABA T18MZ Specifications

General

Brand	FUTABA
Model	T18MZ
Category	Remote Control
Language	English