28
<Before Use>
Receiver's Antenna Installation
The R7008SB has two antennas. In order to maximize signal reception and promote safe modeling
Futaba has adopted a diversity antenna system. This allows the receiver to obtain RF signals on both
Antenna
*Must be kept as straight as possible.
Coaxial cable
R7008SB Receiver
To obtain the best results of the diversity
function, please refer to the following instructions:
*The two antennas should be placed at 90 degrees to each other.
*The Illustration demonstrates how the antenna should be placed.
to avoid vibration, shock, and temperature extremes. For protection, wrap the receiver in foam
by placing it in a plastic bag and securing the open end of the bag with a rubber band before
wrapping it with foam rubber. If you accidentally get moisture or fuel inside the receiver, you
may experience intermittent operation or a crash. If in doubt, return the receiver to our service
center for service.
Antenna
Antenna
To Next Page
Loading...
Need help?
General
