Vertical Speed To Dest: The rate of ascent or descent to a predetermined altitude. You must be navigating for
this data to appear.
Waypoint At Dest: The last point on the route to the destination. You must be navigating for this data to appear.
Waypoint At Next: The next point on the route. You must be navigating for this data to appear.
Profiles
Profiles are a collection of settings that optimize your device based on how you are using it. For example, the
settings and views are different when you use the device for hunting than when geocaching.
When you are using a profile and you change settings, such as data fields or units of measurement, the
changes are saved automatically as part of the profile.
Creating a Custom Profile
You can customize your settings and data fields for a particular activity or trip.
1 Select Setup > Profiles > Create Profile > OK.
2 Customize your settings and data fields.
Selecting a Profile
When you change activities, you can change the setup of the device by changing the profile.
1 Select Profile Change.
2 Select a profile.
Editing a Profile Name
1 Select Setup > Profiles.
2 Select a profile.
3 Select Edit Name.
4 Enter the new name.
Deleting a Profile
NOTE: Before you can delete the active profile, you must activate a different profile. You cannot delete a profile
while it is active.
1 Select Setup > Profiles.
2 Select a profile.
3 Select Delete.
System Settings
Select Setup > System.
Satellite System: Sets the satellite system (GPS and Other Satellite Systems, page 13).
WAAS/EGNOS: Enables the system to use Wide Area Augmentation System/European Geostationary
Navigation Overlay Service (WAAS/EGNOS) data.
Language: Sets the text language on the device.
NOTE: Changing the text language does not change the language of user-entered data or map data, such as
street names.
Battery Type: Allows you to change the type of AA battery you are using.
USB Mode: Sets the device to use mass storage mode or Garmin mode when connected to a computer.
Customizing the Device 17