DIRECTION 5750007-1EN, REV. 1 LOGIQ E10 BASIC SERVICE MANUAL
4 - 14 Section 4-2 - Functional checks
4-2-6 Brakes and Direction Lock Functional Checks
Table 4-6 Brakes and Direction Lock Functional Checks
Steps Corresponding Graphic
Front Brakes and Direction Locks
Check that the Front brakes and direction locks function.
Only the Front Casters and brakes are controlled with these pedals.
1.
Press the left pedal (1) to engage the
direction LOCK.
Press both pedals (1+2) to UNLOCK active
lock(s).
3. Front wheels.
You may need to move the Ultrasound
system around a little to get the wheels to
lock into the locked direction.
2.
Press the right pedal (2) to engage the
Parking brakes.
Press both pedals (1+2) to release
(UNLOCK) active lock(s).
Front wheels (3).
Rear Brakes (brakes only)
Only the Rear Casters and brakes are controlled with these pedals.
1.
Press DOWN on the brake lever to LOCK.
Press UP on the lever to UNLOCK.
The Rear Caster only brake and can still
swivel. If both Rear Casters are LOCKED,
this will limit how much they can swivel.
To Next Page
Loading...
Need help?
General
