Replacement Procedures
7-14 LOGIQ V2/LOGIQ V1 – Basic Service Manual
5610739-100 English Rev.10
Backing up the Patient Archive and System Configurations
• Backup the Patient Archive and System Configurations.
For instructions, please see “Data Backup and Restore” in
the User Manual/User Guide.
Recording important settings and parameters
Overview
Always keep a record of the settings for the LOGIQ V2/LOGIQ
V1 on paper. Verify if it is current before starting a software
loading! If needed, record the settings.
This subsection includes descriptions for recording data from
the following screens:
An error, or a power loss may occur.
Always backup the Patient Archive and the Presets (System
Configurations) before loading the software!
In order to complete a successful restore of the Patient
Database, as needed after a hard disk replacement, or if all the
content on the hard disk has been erased, the images must be
moved away from LOGIQ V2/LOGIQ V1 before doing backup
of the Patient Database.
Depending on the location set-up, either move the images to a
remote server or to removable media like DVD or CD discs.
An error, or a power loss may occur.
It is considered to be best practice to always keep a record on
paper of the settings for the LOGIQ V2/LOGIQ V1. Verify if it is
current before you start to load software!
To Next Page
Loading...
Need help?
General
