GE LOGIQ V2 Service Manual

Screen Capture
LOGIQ V2/LOGIQ V1 – Basic Service Manual 8-7
5610739-100 English Rev.10
Capturing a Screen
The following is a generic process to capture any screen from
the scanner:
1. Navigate to and display the image/screen to be captured.
2. Press Store. This will place a snapshot of the screen on the
“clipboard” displayed at the bottom of the scan image
display.
Figure 8-4. Select Image to Capture

GE LOGIQ V2 Specifications

General

Brand	GE
Model	LOGIQ V2
Category	Medical Equipment
Language	English