System Setup
3-6 LOGIQ V2/LOGIQ V1 – Basic Service Manual
5610739-100 English Rev.10
Receiving and unpacking the
equipment
Purpose of this section
This section describes how to receive and unpack the
LOGIQ V2/LOGIQ V1.
Contents in this section
• ‘Warnings for receiving and unpacking’ on page 3-6
• ‘Receiving the LOGIQ V2/LOGIQ V1’ on page 3-6
• ‘Unpacking the LOGIQ V2/LOGIQ V1’ on page 3-8
Warnings for receiving and unpacking
Receiving the LOGIQ V2/LOGIQ V1
Overview
Improper handling during transportation may harm the
equipment inside the package even if the package itself is
undamaged.
Examine all packages
Examine package closely at time of delivery, as described in the
procedure below.
Remember to use relevant personal protecting equipment
(PPE) during packing and unpacking. Check with your local
EHS representative.