GE MFE DMS 2 User Manual

Appendix B. Choosing the File Type
Page 192 DMS 2 Operating Manual
Appendix A: Hardware Assembly Instructions
Follow these instructions and Figure A-1 to assemble the
DMS 2 straps.
1. With the DMS lying on its face, attach the neck strap clip
to a lower attachment point on one side of the instrument.
2. Clip the adjustable leg of the neck strap to the upper
attachment point “D” ring. Be sure both legs of the strap
are untwisted.
3. Repeat the process on the other side of the DMS 2,
removing any twists from the strap.
4. Attach the waist belt clips in the same manner as for the
neck strap, being careful not to twist the waist strap.
5. Rotate “D” rings and adjust strap lengths for maximum
comfort.
FIGURE A-1 – Neck and waste strap assembly

GE MFE DMS 2 Specifications

General

Brand	GE
Model	MFE DMS 2
Category	Measuring Instruments
Language	English