3. Setting Up the DMS 2
DMS 2 Operating Manual Page 51
Step 2:
Press below the selection titled LANG. You’ll
note that the options available are English, German, French,
Spanish, Italian, Portuguese, Norwegian, Swedish, Finnish,
Dutch, and Russian. The default language is English.
Step 3:
The language will be set to the choice last dis-
played.
Selecting the Date Format (GLOBAL-D-FMT)
Step 1:
Activate the GLOBAL Submenu (if it’s not already
activated) by selecting it with
or so that it’s high-
lighted. Five selections will appear across the bottom of the
display screen.
Step 2:
Press below the selection titled D-FMT. You’ll
note that the following options are available:
• Month/Day/Year—Default format
• Day/Month/Year—International format
• Year/Month/Day—Reverse international format
Step 3:
The date format will be set to the choice last
displayed.
Setting the Date (GLOBAL-DATE)
Step 1:
Activate the GLOBAL Submenu (if it’s not already
activated) by selecting it with
or so that it’s high-
lighted. Five selections will appear across the bottom of the
display screen.
Step 2:
In the center selection box, you’ll note that the
instrument will display what it believes to be the current date.
Step 3:
To change the current date, press below the
displayed date until the correct date is displayed.
Step 4:
The current date will be set to the date last dis-
played.
Selecting the Time Format (GLOBAL-T-FMT)
Step 1:
Activate the GLOBAL Submenu (if it’s not already
activated) by selecting it with
or so that it’s high-
lighted. Five selections will appear across the bottom of the
display screen.
To Next Page
Loading...
Need help?
General
