913364/BP0314 138 Printed in U.S.A.
RT250 - DECALS
PAINT / DECAL APPLICATION / GENERAL INFORMATION
GENERAL INFORMATION
Decal location information is provided to assist in
the proper selection and application of new decals,
in the event the original decals become damaged or
the machine is repainted.
For correct replacement of decals, compare the
location illustrations (e.g., drawings, photographs)
to the machine before starting to refinish the unit.
Check off each required decal using the illustration
reference number to find the part number, descrip-
tion and quantity in the list. Refer to the appropriate
illustration for replacement location.
If there is a decal on a part that is to be replaced,
be sure that a new decal is applied to the replace-
ment part.
NOTE: Refer to the SAFETY chapter of the
Operator’s Manual for specific information pro-
vided on the various safety decals.
CAUTION
ALWAYS read and follow the safety precau-
tions and information shown on decals. If
any decal is damaged or unreadable, or if
the unit is repainted, the decals must be
replaced. If repainting, BE SURE that all
decals that apply to your machine are
affixed in their proper locations.
PAINT FINISH
Use this list to order paint for refinishing:
167788 One Gal. Yellow
167789 6 (12-oz. Spray Cans) Yellow
167754 One Gal. Gun-Metal Gray
167755 6 (12-oz. Spray Can) Gun-Metal Gray
NEW DECAL APPLICATION
Before applying the new decals, surfaces must be
free from dirt, dust, grease and other foreign mate-
rial. To apply a solid-formed decal, remove the
smaller portion of the decal backing paper and apply
this part of the exposed adhesive backing to the
clean surface while maintaining proper position and
alignment. Slowly peel off the other portion of the
backing paper while applying hand pressure to
smooth out decal surface. To apply a pre-mask
decal, first remove the backing paper to expose the
adhesive side of the decal. Then, properly orient
and position the decal onto the clean mounting sur-
face. After the decal is firmly applied and smoothly
pressed down, peel off the top covering paper.
To Next Page
Loading...
Need help?
General
