032-0265-EN Rev 1 3-1
Chapter
3
Pre-Installation Information
and Recommendations
Purpose of the Manual
The instructions contained in this manual should be carefully followed for safe, trouble-free and
effective equipment use.
This manual provides the essential information necessary for the installation, operation and
routine care of the DenOptix QST System. The detailed instructions for the imaging software
associated with the scanner can be found in the Imaging Software User Manual and Installation
Guide. Important instructions for personnel who have been trained in intraoral and panoramic
radiography are contained in this manual. This manual is not to be used as a replacement for
training in dental radiography.
Abbreviations and Symbols
AC Alternate current
DC Direct current
Hz Hertz; cycles per second
MHz Millions of hertz
LED Light emitting diode
kVp Peak voltage in thousands of volts
IP Imaging plates
CD-ROM Compact disc, read-only
pan Panoramic
ceph Cephalometric
I/O Intraoral
Combo Combination system capable of scanning both I/O
and panoramic imaging plates
To Next Page
Loading...
Need help?
General
