032-0265-EN Rev 1 1-1
Chapter
1
Introduction
DenOptix® QST “Quad Speed Technology” System by Gendex®
DenOptix QST Intraoral (FMX) System
DenOptix QST Extraoral (E/O) System
DenOptix QST Intraoral and Extraoral System (Combo) System
Congratulations! Your decision to add the DenOptix QST System to your practice represents a
wise investment for the future of your practice.
The DenOptix QST is a revolutionary product designed to completely replace traditional X-ray
film and film processors. This system, built on phosphor imaging plate technology, offers the
following benefits:
• Diagnostic quality images — every time.
• Lowers the price of dental imaging by eliminating the need for costly film,
chemistry and film processors.
• Imaging plates are reusable.
• Saves critical time vs. using processing systems. DenOptix QST will process 4
bitewings in under 30 seconds and a FMX will process 20 images in less than 4
seconds per image. Panoramic images can be obtained in less than 80 seconds.
A cephalometric image can be obtained in less than 80 seconds.
• Significant reduction of X-ray dose as compared to D-speed film.
• It works with your current X-ray generating equipment. There is no need to
purchase new equipment.
• Reduces the hassles associated with the waste stream disposal.
For over 50 years, dental professionals have relied on Gendex to provide X-ray equipment of the
highest technology and quality. From our classic AC intraoral units to the software-driven
Orthoralix
®
panoramic, we are dedicated to providing products with the features and high
quality you desire. As you enjoy using the new DenOptix QST system, you are taking advantage
of our 50 years of manufacturing expertise in the dental industry.
Our motto speaks for itself: Gendex. Imaging Excellence.
To Next Page
Loading...
Need help?
General
