Maintenance Procedures
032-0265-EN Rev 1 5-5
8. Insert the fuse holder and
close the cover. Plug the
power cord back in a
nd turn
the system on as outlined
on page 4-10.
Carousel Maintenance
The carousel from the DenOptix QST scanner can be maintained by the operator. If
the intraoral imaging plate holder on an intraoral, panoramic or cephalometric
carousel becomes damaged, it can be replaced by the operator. Order a
replacement holder from your local Gendex dealer. The damaged holder can be
removed and the new holder mounted as described on page 5-1.
Imaging Plate Maintenance
The DenOptix QST imaging plates have no operator serviceable parts.
Lubrication
The DenOptix QST Digital System might occasionally require lubrication. If the
scanner should start to squeak during scanning, please contact your local Gendex
dealer. Do not position the DenOptix QST scanner in a dusty environment.
Excessive dust levels can result in additional scanner service, beyond normal
service intervals.
To Next Page
Loading...
Need help?
General
