30
Operators Manual
Section 5 - Service Keypad Functions
Genesis machines are fitted with a service keypad
mounted on the rear of the door. This keypad contains
the Operators Program entry key and also allows the
operator to carry out specific functions during routine
cleaning and maintenance.
N.B. During certain operations e.g. View Counters it is
necessary for the operator to utilise the selection keypad
and LCD mounted on the front of the door to access
data. Please refer to Section 6 - Programming Mode for
details of selection keypad layout and functions.
When the safety key is inserted into the door switch and the machine is switched
oonn
, the service keypad allows the operator to carry out the following functions:
5.1 Button 1 - Program Entry
This button allows the operator to access the Operators Program (Section 7, page
37).
5.2 Button 2 - Brewer Open (Freshbrew Models)
This button operates the brewer fitted to freshbrew machines and enables the
operator to remove the brewer chambers/wipe arms assembly for cleaning
purposes. Press and hold to index the brewer to the fully open position.
5.3 Button 3 - Rinse/Flush
1. The flush sequence operates automatically and rinses the mixing bowls.
Before the sequence begins, the system waits until the water in the boiler
is at the correct temperature determined by the thermistor.
2. Instant/Freshbrew Machines: In order to guarantee the highest
standards of cleanliness, the boiler fill valve is disabled, ensuring that the
water used in the sequence is delivered at the optimum temperature to
kill any micro-organisms.
3. Each hot water valve and the corresponding whipper is switched on in
sequence for a pre-set flush time. Once the flush cycle is complete the
machine returns to standby mode, ready to vend.
4. To flush the machine:
a. Open the front door of the machine and insert the safety key.
Caution: Ensure that a suitable container is placed under the
dispense position. Keep hands away from the dispense area whilst the
flushing cycle is in operation.
To Next Page
Loading...
Need help?
General
