15
Operators Manual
Section 3 - How to Vend A Drink
3.1 Selecting A Drink
Drink selections are made by pressing the appropriate selection button on the
keypad and then utilising the keypad selection buttons and the LCD display to alter
the drink strength and add milk/sugar to suit the customers personal preference.
When in standby mode, all drink selection buttons will be lit indicating that the drink
is available to be selected. At this time the Milk, Sugar and Start buttons are not lit.
The following example describes how to vend a Freshbrew Tea selection from a
freshbrew machine set to ‘Free Vend’.
1. Press selection button 3, Freshbrew Tea
on the keypad. All of the other selections
buttons will be extinguished, the Milk,
Sugar and Start buttons will light up and
the machine exits from standby mode. The
LCD will display the screen as shown
opposite.
N.B. The default strength setting for this drink selection is Normal as
shown.
2. To obtain a Strong or Mild beverage it is necessary to press the current
drink selection button. Pressing once will toggle to the Strong selection.
Pressing the button again will toggle to the Mild selection.
Pressing the current drink selection button again will revert to the Normal
screen.
3. If milk and/or sugar is required, it is
necessary to press the corresponding
button on the keypad for each selection.
When the Milk button is pressed the LCD
changes and displays the default screen as
shown opposite.
To Next Page
Loading...
Need help?
General
