33
Operators Manual
5.9 Button 9 - Fill Tank (B2C Machines)
When this button is pressed, the machine pumps a measured amount of water
through the system - approximately 400ml, heating it as it does so. This ensures that
heated water is immediately available when a drink is selected. This button should
also be used to purge any water left in the system after the machine has been
moved or shut down for any length of time.
5.10 Button 10 - Boiler Cool Down (B2C Machines)
This button allows an engineer to work safely on the water system and should not
be used by the operator.
5.11 Button 11 - CoEx® Tablet Clean (B2C Machines)
This button when pressed, initiates the CoEx® brewer tablet cleaning routine.
Crane Merchandising Systems recommends that this brewer cleaning routine should
be carried out on a weekly basis (see page 28 for full details).
5.12 Button 12 - CoEx® Waste Counter Reset (B2C
Machines)
Every time that the coffee waste container is emptied the waste counter must be
reset. Press button 12 on the service keypad. Two audible bleeps confirm that the
counter has been reset to zero.
5.13 Button 14 - Clear SureVend Error
This button allows the operator to simply and quickly clear SureVend errors caused
by cup failures.
5.14 Button 15 - Start
This button has the same functions as the START key on the drink selection keypad.
To Next Page
Loading...
Need help?
General
