GSC35XX Series User Manual
Version 1.0.0.15
The IP address or URL for the Target Host of the Ping.
Press Start to send traceroute request to configured target host.
Press Stop to end traceroute running process.
Enter a host name and find out the corresponding IP address. It will also
do reverse name lookup and find the host name for an IP address you
specify.
Event Notification
Set the URL for events on phone web GUI, and when the corresponding event occurs on the device, the
device will send the configured URL to SIP server. The dynamic variables in the URL will be replaced by
the actual values of the device before sending to SIP server, in order to achieve the purpose of events
notification. Here are the standards:
1. The IP address of the SIP server needs to be added at the beginning and separate the dynamic
variables with a "/".
2. The dynamic variables need to have a "$" at the beginning. For example: local=$local
3. If users need to add multiple dynamic variables in the same event, users could use "&" to connect with
different dynamic variables. For example: 192.168.40.207/mac=$mac&local=$local
4. When the corresponding event occurs on the device, the device will send the MAC address and phone
number to server address 192.168.40.207.
Configures the event URL when phone boots up.
Configures the event URL when phone has an incoming call.
Configures the event URL when phone has an outgoing call. (Available
for GSC3510 only)
Configures the event URL when the device has new a missed call.
Configures the event URL when a call is established.
Configures the event URL when a call is disconnected.
Configures the event URL when the forward feature is enabled on the
device.
Configures the event URL when the forward feature is disabled on the
device.
Configures the event URL when users transfer a call with blind transfer on
the device.