Grandstream Networks GWN7000 User Manual

P a g e | 137
GWN7000 User Manual
Version 1.0.6.28
Firmware Server
Configure the IP address or URL for the firmware upgrade server.
Config Server
Configure the IP address or URL for the configuration file server.
Check Update on Boot
Choose whether to enable or disable automatic upgrade and provisioning
after reboot. Default is disabled.
Automatic Upgrade Check
Interval(m)
Specify the time period to check for firmware upgrade (in minutes).
Reboot
Click on Reboot button to reboot the device
Download Configuration
Click on Download to download the device’s configuration file.
Upgrade Now
Click on Upgrade, to launch firmware/config file provisioning.
Please make sure to Save and Apply changes before clicking on Upgrade.
Factory Reset
Click on Reset to restore the GWN7000 as well as all online GWN76xx units
to factory default settings
Access
Table 47: Maintenance - Access
Current Administrator
Password
Enter the current administrator password
New Administrator
Password
Change the current password. This field is case sensitive with a maximum
length of 32 characters.
Confirm New
Administrator Password
Enter the new administrator password one more time to confirm.
User Password
Configure the password for user-level Web GUI access. This field is case
sensitive with a maximum length of 32 characters.
User Password
Confirmation
Enter the new User password again to confirm.
Syslog
Table 48: Maintenance - Syslog
Syslog Server
Enter the IP address or URL of Syslog server. Please reboot the GWN7000
to take effect.
Syslog Level
Select the level of Syslog, 5 levels are available: None, Emergency, Alert,
Critical, Error, Warning, Notice, Information and Debug.
Please reboot the GWN7000 to take effect.

Grandstream Networks GWN7000 Specifications

General

Brand	Grandstream Networks
Model	GWN7000
Category	Network Router
Language	English