GWN7000 User Manual
Version 1.0.6.28
User Manager
Under this section, administrator can generate or create user accounts that will be used for VPN connection
authentication, click on in order to create a new user account.
The following table summarizes the configuration parameters:
Table 56: VPN User Parameters
Check this option to enable/disable the user account.
Check this option to enable the user connection to the PPTP server.
Enter user full name. When using PPTP it defaults to pptpd.
Set user pre-shared key for authentication.
Enabled PPTP Client
Subnet
Check this option when using PPTP, and enter the client subnet.
Configured to which subnet this client belongs to (ex: 192.168.1.0/24).
Configures OpenVPN user subnet (ex: 192.168.1.0/24).