Harman VP3 ROW User Manual

Uconnect™ ACCESS USER’S MANUAL 21
Eject Button – Ejecting a Disc
Inserting Compact Disc
Gently insert one Disc into the Disc player with the Disc
label following the illustration indicated on the player.
The Disc will automatically be pulled into the Disc player
and the Disc icon will illuminate on the radio display. If
a Disc does not go into the slot more than 1.0 in (2.5 cm),
a disc may already be loaded and must be ejected before
a new Disc can be loaded.
If you insert a Disc with the ignition ON and the radio
ON, the unit will switch to CD/Disc mode and begin to
play when you insert the Disc. The display will show the
track number, and index time in minutes and seconds.
Play will begin at the start of track 1.
Browse
Touch the browse soft-key to scroll through and select a
desired track on the Disc. Touch the exit soft-key if you
wish to cancel the browse function.
Press the EJECT button to eject the Disc. If you have
1
ejected a Disc and have not removed it within 10 seconds,
it will be reloaded. If the Disc is not removed, the radio
will reinsert the Disc but will not play it.
A Disc can be ejected with the radio and ignition OFF.
USB/iPod ® Mode
USB/iPod ® Mode is entered by either inserting a USB
Jump Drive or iPod ® cable into the USB port or by
touching the Media button located left of the display.
Once in Media Mode, touch the source soft-key and select
USB/iPod ® .
Inserting USB/iPod ® Device
Gently insert the USB/iPod ® device into the USB Port. If
you insert a USB/iPod ® device with the ignition ON and
the radio ON, the unit will switch to USB/iPod ® mode
and begin to play when you insert the device. The

Harman VP3 ROW Specifications

General

Brand	Harman
Model	VP3 ROW
Category	Car Receiver
Language	English