Harman VP3 ROW User Manual

28 Uconnect™ ACCESS USER’S MANUAL
• Touch the Loudness soft-key to select the Loudness
feature. When this feature is activated it improves
sound quality at lower volumes.
Clock Setting
There are two ways to enter the clock setting procedure
on the Uconnect™ 5.0 system.
1. Press the More hard-key on the right side of the
display, next press the Time soft-key and then press
the Set soft-key. OR Press the Settings hard-key on the
right side of the display, then press the Clock soft-key.
The Time setting screen is displayed and the clock can
be adjusted as described in the following procedure.
NOTE: In the Clock Setting Menu you can also select
Display Clock. Display Clock turns the clock display in
the status bar on or off.
2. Touch the Up or Down arrows to adjust the hours or
minutes, next select the AM or PM soft-key. You can
also select 12hr or 24hr format by touching the desires
soft-key.
3. Once the time is set press the “Done” soft-key to exit
the time screen.
Media Mode
Media Mode is entered by touching the Media hard-key
located on the side of the display. Once in Media Mode,
touch Source soft-key and the desired mode soft-key.
Disc, USB, AUX and Bluetooth are the Media sources
available.
Common Media Functions
Seek Up/Down
Touch and release the right arrow soft-key for the next
selection. Touch and release the left arrow soft-key to
return to the beginning of the current selection, or return

Harman VP3 ROW Specifications

General

Brand	Harman
Model	VP3 ROW
Category	Car Receiver
Language	English