Harman VP3 ROW User Manual

94 Uconnect™ ACCESS USER’S MANUAL
WARNING! (Continued)
related to the use of the Uconnect™ features and
applications in this vehicle. Only use Uconnect™
when it is safe to do so. Failure to do so may result in
an accident involving serious injury or death.
When you press the Uconnect™ Voice Command
button, you will hear a beep. The beep is your signal
to give a command.
If no command is spoken the system will say one of two
responses:
• I didn’t understand
• I didn’t get that, etc.,
If a command is not spoken a second time, the system
will respond with an error and give some direction as
what can be said based on the context you are in. After
three consecutive failures of a spoken command the VR
session with end.
Pressing the Uconnect™ Voice Command button
while the system is speaking is known as “barging in.”
The system will be interrupted, and after the beep, you
can say a command. This will become helpful once you
start to learn the options.
NOTE: At any time, you can say the words “Cancel” or
“Help”.
These commands are universal and can be used from any
menu. All other commands can be used depending upon
the active application.
When using this system, you should speak clearly and at
a normal speaking volume.

Harman VP3 ROW Specifications

General

Brand	Harman
Model	VP3 ROW
Category	Car Receiver
Language	English