Hayward Easy Temp ECP 06 User Manual

15
4. USER INTERFACE (continued)
4.5 Settings and viewing the set point (Desired water
temperature)
In “OFF” and “ON” Mode
Press the buttons
or to set the desired set point. Settings are made
to an accuracy of 0.5 °C.
It is recommended never to exceed 30°C to avoid deterioration of the
liners.
Note: Whetheron or off, all you need to do is press the or button
toview or change the set point.
4.6 Locking and unlocking the touch screen
Press the On/Off button for 5 seconds until it beeps. The buttons become
inactive.
To unlock, press
for 5 seconds until it beeps.
The buttons become active again.

Hayward Easy Temp ECP 06 Specifications

General

Brand	Hayward
Model	Easy Temp ECP 06
Category	Heat Pump
Language	English